| About |
|---|
| Electrafil® ABS CF20 BK is an Acrylonitrile Butadiene Styrene (ABS) product filled with 20% carbon fiber. It can be processed by injection molding and is available in North America. Primary characteristic: flame rated.&& |
| Product Description | |
|---|---|
| Material Status | Commercial: Active |
| Features | HB |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.13 | g/cm³ | ASTM D792 |
| Mold shrinkage | |||
| MD：3.2 mm | 0.15 | % | ASTM D955 |
| Water Absorption | |||
| 24hr | 0.14 | % | ASTM D570 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Notched lzod impact strength of cantilever beam notch | |||
| 23℃，3.2mm | 59 | J/m | ASTM D256 |
| Unnotched lzod impact strength of cantilever beam | |||
| 3.2 mm | 270 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature HDT | ASTM D648 | ||
| 0.45 MPa, unannealed | 113 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed | 104 | ℃ | ASTM D648 |
| Linear coefficient of thermal expansion CTE | |||
| MD | 3.1E-5 | 1/℃ | ASTM D696 |
| ELECTRICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface Resistivity | 10 to 1.0E+4 | ohms | ASTM D257 |
| 10 to 1.0E+3 | ohms·cm | ASTM D257 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant grade | HB | UL 94 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 108 | ASTM D785 | |
| Tensile Strength | |||
| Break | 110 | MPa | ASTM D638 |
| Tensile Strain | |||
| Break | 2.0 | % | ASTM D638 |
| Flexural Modulus | 11900 | MPa | ASTM D790 |
| Flexural Strength | 152 | MPa | ASTM D790 |
| Process Conditions | |||
|---|---|---|---|
| Injection Molding | Nominal value | Unit | Test method |
| Drying Temperature | 77 to 88 | °C | |
| Drying Time | 2.0 to 16 | hr | |
| Rear Zone 1 Temperature | 216 to 232 | °C | |
| Middle Zone 2 Temperature | 221 to 238 | °C | |
| Front Zone 3 Temperature | 210 to 221 | °C | |
| Nozzle Temperature | 199 to 221 | °C | |
| Melt Temperature (Parent) | 232 to 260 | °C | |
| Mold Temperature | 71 to 88 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |