ELECTRAFORCE PA66CV28SI BK

About
Description: This product is characterized by high stiffness and strength combined with excellent low temperature impact performance. Surface appearance of this resin is very good.&&

Product Description
Generic	PA66
Material Status	Commercial: Active
Features	Good Rigidity,Good surface appearance,High impact resistance,low-temperature impact resistance
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.27	g/cm³	ASTM D792
Shrinkage rate
MD：0.125 mm	0.40 to 0.60	%	ASTM D955

MECHANICAL	Nominal value	Unit	Test method
tensile strength
fracture	165	MPa	ASTM D638
Tensile strain
fracture	3.0	%	ASTM D638
Bending modulus	73.8	MPa	ASTM D790

IMPACT	Nominal value	Unit
Impact strength of cantilever beam notch
-30℃	150	J/m
23℃	210	J/m

THERMAL	Nominal value	Unit
Hot deformation temperature
0.45 MPa, unannealed	253	℃
1.8 MPa, unannealed	237	℃

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	80	°C
Recommended maximum moisture content	< 0.20	%
Barrel rear temperature	265 to 275	°C
Barrel middle temperature	275 to 280	°C
Barrel front temperature	280 to 290	°C
Mold temperature	80	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.