| About |
|---|
| Westlake ELEVATE™ EM518AA is an ethylene vinyl acetate copolymer with 18.5% VA. EM518AA is designed for use in applications such as injection molding, compounding, foaming, and general extrusion. This material has excellent low temperature brittleness properties, melt strength, and flexibility. Application/Uses: Injection Molding Compounding Foam&& |
| Product Description | |
|---|---|
| Supplier | Westlake Chemical |
| Generic | EVA |
| Material Status | Commercial: Active |
| Features | Good flexibility,Antifreeze,Good melt strength,Copolymer |
| Availabilitys | North America,Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.940 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | 2.5 | g/10min | ASTM D1238 |
| Vinyl acetate content | 18.5 | wt% | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore D, 15 seconds, molded | 32 | ASTM D2240 | |
| tensile strength | |||
| Fracture, molded | 12.0 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, molded | 650 | % | ASTM D638 |
| Bending modulus | |||
| 1% cut, molded | 48.3 | MPa | ASTM D790 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 68.0 | ℃ | ASTM D1525 |
| Melting peak temperature | 86.0 | ℃ | Internal Method |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |