ELITE™ 5401G

About
ELITE™ 5401G Enhanced Polyethylene Resin is a copolymer produced via INSITE™ Technology from Dow. It offers a unique combination of low seal initiation, moderate stiffness and low blocking for excellent performance on automated packaging equipment. For food and specialty packaging films Superior impact resistance and tear properties Complies with: U.S. FDA FCN 424 Canadian HPFB No Objection EU, No 10/2011 Consult the regulations for complete details.&&

About

ELITE™ 5401G Enhanced Polyethylene Resin is a copolymer produced via INSITE™ Technology from Dow. It offers a unique combination of low seal initiation, moderate stiffness and low blocking for excellent performance on automated packaging equipment. For food and specialty packaging films Superior impact resistance and tear properties Complies with: U.S. FDA FCN 424 Canadian HPFB No Objection EU, No 10/2011 Consult the regulations for complete details.&&

Product Description
Supplier	DOW
Generic	EPE
Material Status	Commercial: Active
Availabilitys	North America,Latin America,Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.9175	g/cm³	ASTM D792
Melt Flow Rate
	1.0	g/10min	ASTM D1238
thickness	50.8	g/min
Antiblock level	2500	ppm
Sliding level	1000	ppm

MECHANICAL	Nominal value	Unit	Test method
tensile strength	8.267	MPa	ASTM D882
tensile strength	8.811	MPa	ASTM D882
Secant modulus	180.9	MPa	ASTM D882
Secant modulus	204.4	MPa	ASTM D882
tensile strength	38.04	MPa	ASTM D882
tensile strength	36.54	MPa	ASTM D882
impact force	18	ft-lbf/in3
Tensile strain
fracture	572	%	ASTM D882
Tensile strain
fracture	612	%	ASTM D882
tear strength	780	g	ASTM D192
tear strength	975	g	ASTM D192
Drop hammer impact	>=850	g	ASTM D1709

optical performance	Nominal value	Unit	Test method
gloss	64		ASTM D2457
Haze μ M	13	%	ASTM D1003

THERMAL	Nominal value	Unit	Test method
Melting temperature	123	℃	Internal Method
Vicat Softening Temp
	100	℃	ASTM D1525

Other performance	Nominal value	Unit	Test method
tear strength	15.4	g/micron	ASTM D1922
tear strength	19.19	g/micron	ASTM D1922
Starting temperature of heat sealing strength	95.0	℃
impact force	168	ft-lbf/in3	ASTM D882
Puncture ability	5.76	J

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.