ELITE™ NG 5401B

About
ELITE™ NG 5401B is a Linear Low Density Polyethylene, 1-Octene copolymer, produced with the SOLUTION™ technology. This resin presents excellent tensile, tear and puncture resistance even at low temperatures with great gloss and clarity. It has a low seal initiation temperature with high seal performance allowing an increase in the speed line of form, fill and seal. Main Characteristics Film for form, fill and seal Film for packaging for frozen food Excellent mechanical properties even at low temperatures Low seal initiation temperature and high seal properties Excellent optics Complies with: US FDA FCN 424 Europe Commission Regulation (EU) No 10/2011 Suitable for food contact Report # 823/05 issued by INAL according to MERCOSUR Consult the regulations for complete details.&&

About

ELITE™ NG 5401B is a Linear Low Density Polyethylene, 1-Octene copolymer, produced with the SOLUTION™ technology. This resin presents excellent tensile, tear and puncture resistance even at low temperatures with great gloss and clarity. It has a low seal initiation temperature with high seal performance allowing an increase in the speed line of form, fill and seal. Main Characteristics Film for form, fill and seal Film for packaging for frozen food Excellent mechanical properties even at low temperatures Low seal initiation temperature and high seal properties Excellent optics Complies with: US FDA FCN 424 Europe Commission Regulation (EU) No 10/2011 Suitable for food contact Report # 823/05 issued by INAL according to MERCOSUR Consult the regulations for complete details.&&

Product Description
Supplier	DOW
Generic	EPE
Material Status	Commercial: Active
Availabilitys	Latin America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.918	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	1.0	g/10min	ASTM D1238

film	Nominal value	Unit	Test method
film thickness
test	38	µm	Internal Method
Membrane puncture resistance	9.02	J/cm³	Internal Method
Secant modulus			ASTM D882
2% secant, MD	132	MPa	ASTM D882
2% secant, TD	136	MPa	ASTM D882
tensile strength			ASTM D882
MD, yield	10.0	MPa	ASTM D882
TD, yield	10.0	MPa	ASTM D882
MD, fracture	38.0	MPa	ASTM D882
TD, fracture	30.0	MPa	ASTM D882
Tensile strain			ASTM D882
MD, fracture	720	%	ASTM D882
TD, fracture	800	%	ASTM D882
Drop hammer impact	1000	g	ASTM D1709
Elmandorf tear strength			ASTM D1922
MD	680	g	ASTM D1922
TD	890	g	ASTM D1922

optical performance	Nominal value	Unit	Test method
gloss
45°	62		ASTM D2457
Haze	11	%	ASTM D1003

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.