| About |
|---|
| ELIX ABS 118HF Very high flow ABS, high gloss surface with antistatic additive Product properties: Very high flow ABS material. Excellent balance of impact strength and flowability. High gloss surface finish. Used as base resin for improved flowability Housing big parts. Thin-walled parts.&& |
| Product Description | |
|---|---|
| Generic | ABS |
| Material Status | Commercial: Active |
| Features | Good surface appearance,High liquidity,Antistatic property |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Volume Rate | |||
| 220℃，10 kg | 55.0 to 70.0 | cm³/10min | ISO 1133 |
| Butadiene Content | 17 to 19 | % | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Ball hardness | 86.0 to 103 | MPa | ISO 2039-1 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 14 to 25 | kJ/m² | ISO 180-1A |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | |||
| B120 | 95.0 to 105 | ℃ | ISO 306/B120 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 50 % r. h |
| 3. 60x60x2 |
| 4. 50 % r. h. |
| 5. 0.079 in/min |
| 6. 23°C/50 % r. h. |
| 7. US – FMVSS |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |