Eltex® A4009MFN1325

About
Eltex® A4009MFN1325 is a high density polyethylene. It is a homopolymer with a narrow molecular weight distribution primarily intended for the extrusion of monofilaments. Appliations: extrusion of monofilaments high tenacity tapes ceral liner films injection molding Blow-moulding for food packaging Benefits and Features: high tenacity monofilaments and tapes very low gel content superior processability & surface quality very low MVTR (moisture vapor transmission rate)&&

About

Eltex® A4009MFN1325 is a high density polyethylene. It is a homopolymer with a narrow molecular weight distribution primarily intended for the extrusion of monofilaments. Appliations: extrusion of monofilaments high tenacity tapes ceral liner films injection molding Blow-moulding for food packaging Benefits and Features: high tenacity monofilaments and tapes very low gel content superior processability & surface quality very low MVTR (moisture vapor transmission rate)&&

Product Description
Supplier	INEOS
Generic	HDPE
Material Status	Commercial: Active
Features	Excellent Processability,Good surface appearance,Low speed solidification point,Food contact compliance,Poor moisture permeability,Weight distribution,High density,Homopolymer
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.960	g/cm³	ISO 1183/A
Melt Flow Rate			ISO 1133
190℃，2.16kg	0.90	g/10min	ISO 1133
190℃，21.6kg	36	g/10min	ISO 1133
190℃，5.0kg	2.8	g/10min	ISO 1133

THERMAL	Nominal value	Unit	Test method
Melting temperature	136	℃	ISO 11357-3

Supplementary information	Nominal value	Unit	Test method
Apparent Dynamic Viscosity（190℃）	1700000	mPa·s

Notes
1. Typical properties: these are not to be construed as specifications.
2. 2nd heating
3. 100/s
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.