Eltex® P CAP912

About
Polypropylene Random Copolymer Benefits & Features Eltex® P CAP912 is a random copolymer polypropylene specially developed for caps and closures applications in direct contact with beverages. Eltex® P CAP912 has excellent organoleptic properties – taste & odour – which are guaranteed and is compliant with volatile organic compound requirements following EPA524.2; this provides ultra-clean packaging capability. Eltex® P CAP912 is a medium ethylene content random copolymer with good balance of stiffness, impact and processing. It offers for the injection moulding of caps and closures high transparency, surface aspect quality and hinge resistance. Good transparency Good flow Good mould release Good hinge properties Excellent and quality controlled organoleptic properties. In order to preserve the excellent organoleptic properties, it is important not to exceed a melt temperature of 250°C during processing. Applications Caps and closures for the packaging of still beverages: water, juices, functionalised beverages,…&&

Product Description
SupplierINEOS
GenericPP copolymer
Material StatusCommercial: Active
FeaturesGood Clarity,High purity,Good surface appearance,Good liquidity,Good stripping performance,Good sensory characteristics.,Random copolymer
AvailabilitysEurope
Process MethodsInjection Molding

Technical Data
PHYSICALNominal valueUnitTest method
Melt Flow Rate
230℃,2.16kg13g/10minISO 1133

MECHANICALNominal valueUnitTest method
tensile strength
Yield, 23 ℃, injection molding28.0MPaISO 527-2
Bending modulus
23 ℃, injection molding1100MPaISO 178

IMPACTNominal valueUnitTest method
Impact strength of cantilever beam notch ISO 180/A
0 ℃, injection molding3.3kJ/m²ISO 180-A
23 ℃, injection molding6.0kJ/m²ISO 180-A

THERMALNominal valueUnitTest method
Hot deformation temperature
0.45 MPa, unannealed90.0ISO 75-2/B
Vicat Softening Temp
A50130ISO 306/A50
Crystallization peak temperature
DSC119Internal Method

optical performanceNominal valueUnitTest method
Haze ASTM D1003
1000 µm15%ASTM D1003
2000 µm30%ASTM D1003

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.