| About |
|---|
| Eltex® P KS417 is a random copolymer with a high ethylene content, developed for use primarily as the sealing layer in “coextruded bioriented metallisable film” ; it contains no technical additives and is thus particularly appreciated by users wishing to use their own “formulas”. Its stabilisation package has been especially designed for metallisable film applications. Applications: Random copolymer specially developed for the sealing layers of “coextruded bioriented film” produced on “high speed BOPP” line Suitable also for coextruded cast film&& |
| Product Description | |
|---|---|
| Supplier | INEOS |
| Generic | PP copolymer |
| Material Status | Commercial: Active |
| Features | Random copolymer |
| Availabilitys | Europe |
| Process Methods | Film extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 230℃，2.16kg | 7.0 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Bending modulus | |||
| 23℃ | 720 | MPa | ISO 178 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| Initial sealing temperature | 115 | ℃ | Internal Method |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | |||
| DSC | 134 | ℃ | ASTM D3417 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 1s, 3 bars, 100 mm/min, 100 g/cm |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |