| About |
|---|
| Benefits & Features ELTEX® P KV389 is a terpolymer specially developed for the sealing layers of blown multilayer BOPP film for low sealing performance and lamination. ELTEX® P KV389 is specially designed for the so-called “double bubble process”. It contains no technical additives Low haze, high clarity and gloss Low sealing temperature (90°C)&& |
| Product Description | |
|---|---|
| Supplier | INEOS |
| Generic | PP copolymer |
| Material Status | Commercial: Active |
| Features | Good Clarity,Good surface appearance,Terpolymer,Low temperature heat sealing |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 230℃，2.16kg | 9.0 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Bending modulus | |||
| 23℃ | 500 | MPa | ISO 178 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| Heat sealing threshold | 90 | ℃ | Internal Method |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting peak temperature | 128 | ℃ | ASTM D3417 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 1s, 3 bars, 100 mm/min, 100 g/cm |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |