Elvaloy® AC 1218

About
Elvaloy® AC 1218 is a copolymer of ethylene and methyl acrylate. It is available in pellet form for use in conventional extrusion equipment designed to process polyethylene type resins. 18% Methyl Acrylate&&

Product Description
Supplier	DOW
Generic	EMA
Material Status	Commercial: Active
Features	Copolymer
Availabilitys	North America,Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.940	g/cm³	ASTM D792
Density	0.940	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	2.0	g/10min	ISO 1133
190℃，2.16kg	2.0	g/10min	ASTM D1238
Methacrylic acid content	18.0	wt%

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	60.0	℃	ASTM D1525
Vicat Softening Temp	60.0	℃	ISO 306
Melting temperature
DSC	94.0	℃	ISO 3146
Melting temperature	94.0	℃	DSC

Process Conditions
Extrusion	Nominal value	Unit	Test method
Barrel 1 zone temperature	135	°C
Barrel 2 zone temperature	160	°C
Barrel 3 zone temperature	185	°C
Barrel 4 zone temperature	185	°C
Barrel 5 zone temperature	185	°C
Connector temperature	185	°C
Melt temperature	160 to 235	°C
Nozzle temperature	185	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.