Elvaloy® PTW - SOLIAO

About
Elvaloy® PTW is an ethylene terpolymer, used as and Impact Modifier for a variety of polymers. When used in a CPET tray formulation, Elvaloy® PTW provides both toughening and increases the melt strength of the PET.&&

Product Description
Supplier	DOW
Generic	热塑性聚酯
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.940	g/cm³	ASTM D792
Density	0.940	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	12	g/10min	ASTM D1238
190℃，2.16kg	12	g/10min	ISO 1133

THERMAL	Nominal value	Unit	Test method
Melting peak temperature	72.0	℃	ASTM D3417
Melting temperature
DSC	72.0	℃	ISO 3146

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	< 310	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.