Elvax® 3124 - SOLIAO

About
DuPont™ Elvax® 3124 is an extrudable ethylene-vinyl acetate copolymer resin available in pellet form for use in conventional extrusion equipment designed to process polyethylene resins. Composition 9.0 % By Weight Vinyl Acetate comonomer content Thermal Stabilizer: BHT antioxidant Applications This resin is designed to provide a low temperature heat seal to itself or many other materials commonly used in flexible packaging applications. The melt properties of this resin allow it to be processed on extrusion coating and cast film equipment over a wide range of line speeds and film thicknesses. Typically, cast film of this grade is adhesive laminated to polyester or other substrates as required by the application.&&

About

DuPont™ Elvax® 3124 is an extrudable ethylene-vinyl acetate copolymer resin available in pellet form for use in conventional extrusion equipment designed to process polyethylene resins. Composition 9.0 % By Weight Vinyl Acetate comonomer content Thermal Stabilizer: BHT antioxidant Applications This resin is designed to provide a low temperature heat seal to itself or many other materials commonly used in flexible packaging applications. The melt properties of this resin allow it to be processed on extrusion coating and cast film equipment over a wide range of line speeds and film thicknesses. Typically, cast film of this grade is adhesive laminated to polyester or other substrates as required by the application.&&

Product Description
Supplier	DOW
Generic	EVA
Material Status	Commercial: Active
Features	Good flexibility,Good heat sealing,Food contact compliance,Inoxidizability,Copolymer,Heat Stabilized,Low temperature heat sealing
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.930	g/cm³	ASTM D792 , ISO 1183
Melt Flow Rate
190℃，2.16kg	7.0	g/10min	ASTM D1238，ISO 1133
Vinyl acetate content	9.0	wt%

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	77.0	℃	ASTM D1525 , ISO 306
Melting peak temperature	98.0	℃	ASTM D3418 , ISO 3146
freezing point
—	79	℃	ASTM D3418
—	79	℃	ISO 3146

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	< 235	°C

Notes
1. Typical properties: these are not to be construed as specifications.
2. DSC
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.