About Product Description Supplier Celanese Material Status Commercial: Negative Features HB,Heat Stabilized Availabilitys North America,Asia Pacific,Latin America,Europe,Africa & Middle East Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Molding shrinkage Parallel 0.2 % ISO 294-4 Normal…
About 20-3035 is a low density, two component epoxy potting and encapsulating system. The 20-3035 is less than half the weight of most commercially available potting compounds. 20-3035 exhibits very low shrinkage during the cure cycle and also has a…
About Solarene® DH700 is a General Purpose Polystyrene product. It is available in Asia Pacific or Europe. Primary characteristic: flame rated.&& Product Description Generic PS (GPPS) Material Status Commercial: Active Availabilitys Asia Pacific,Europe Technical Data THERMAL Nominal value Unit Test…
About 20-3004 LV & HV are two component chemical resistance epoxy systems. They were developed for potting, coating, and adhesive applications requiring superior chemical resistance. They exhibit outstanding bonds to a variety of substrates. 20-3004 LV is a low viscosity…
About Interpol 47-5117/47-5205 is a Polyurethane (Polyester based) (PUR-Ester) product. It can be processed by casting or injection molding and is available in North America. Characteristics include: Good Flexibility Good Toughness&& Product Description Generic PUR-酯 Material Status Commercial: Active Features…
About Jamplast JPAH is an Acetal (POM) Homopolymer material. It is available in North America for cast film, extrusion, injection molding, profile extrusion, or sheet extrusion. Important attributes of Jamplast JPAH are: Flame Rated High Viscosity Lubricated Wear Resistant Typical…
About Grivory® HT1V-65H black 9205 is a Polyamide 6I/6T Copolymer (Nylon 6I/6T) material filled with 65% glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Important attributes of…
About Low Chlorine type of PPS-hb. It is specially used in E/E industry which requires the chlorine content. PPS-hb is high rigidity crystalline polymer that offers high-temperature resistance, innoxious, flame resistance, radiation resistance, solvent resistance, electrical insulation, arc resistance, low…
About POLYLAC® PA-709H is an Acrylonitrile Butadiene Styrene (ABS) product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Primary characteristic: flame rated.&& Product Description Supplier CHI…
About Product Description Generic TPE Material Status Commercial: Active Technical Data MECHANICAL Nominal value Unit Test method hardness 50 Shore A GB/T6031-1998 tensile strength 3.6 MPa GB/T528-1998 Constant tensile strength 2.3 MPa GB/T528-1998 elongation at break 520 % GB/T528-1998 Permanent…