About Dryflex A thermoplastic elastomer (TPE) bondable grades, primarily based on SBS and SEBS, increase freedom of design and open up a vast range of application opportunities. It used to be a complex and costly affair producing details made of…
About PA6加纤30% Product Description Supplier DOSN Generic PA6 Material Status Commercial: Active Features Good Rigidity,Good wear resistance Technical Data PHYSICAL Nominal value Unit Test method Density 1.38 g/cm³ ASTM D792 Shrinkage rate 0.3-0.7 % ASTM D955 Water absorption rate 0.8…
About Product Description Generic PP not specified Material Status Commercial: Active Technical Data MECHANICAL Nominal value Unit Test method Tensile yield strength 350 ≥ Tensile yield strength 12 ≥,Mpa Bending modulus 14500 Kg/cm² impact strength 5.5 kg.cm/cm Rockwell hardness 90…
About Unreinforced Polyamide 66 Developed for the Healthcare Industry&& Product Description Supplier DuPont Generic PA66 Material Status Commercial: Active Features V-2 Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit…
About OXPEKK® IG205BS is a Polyetherketoneketone (PEKK) material filled with 5.0% barium sulfate. It is available in Europe or North America. Primary attribute of OXPEKK® IG205BS : Crystalline.&& Product Description Generic PEKK Material Status Commercial: Active Features Crystal Availabilitys North…
About PP 1500X is a specialty formulated high impact copolymer polypropylene.&& Product Description Supplier LyondellBasell Generic PP homopolymerization Material Status Commercial: Active Features High impact resistance,Impact copolymer Availabilitys North America,Asia Pacific Process Methods Injection Molding Technical Data PHYSICAL Nominal value…
About TR Granules possess the characteristics of both thermosetting rubber and thermoplastic resin, which have been widely used to replace traditional vulcanized rubber such as NBR, BR, SBR, etc. TR Granules are compounded thermoplastic materials composed primarily of Styrenic Block…
About MIL- C24640 & MIL-C24643R approved&& Product Description Generic Polyolefin Elastomer Material Status Commercial: Active Features Halogen free,Flame Characteristics Availabilitys North America Technical Data PHYSICAL Nominal value Unit Test method Density 1.43 g/cm³ ASTM D792 MECHANICAL Nominal value Unit Test…
About EMPILON® HAR series compound are specially designed for over-molding with engineering plastic such as ABS, PC, Nylon, PETG, PBT etc. which are commonly use in the 3C industry (Computer, Communication and Consumer electronics) as well as hand held device…
About HIDEN® B500 is a High Density Polyethylene material. It is available in Asia Pacific for blow molding. Important attributes of HIDEN® B500 are: Chemical Resistant Impact Resistant Typical applications include: Containers Food Contact Applications Industrial Applications Medical/Healthcare&& Product Description…