About Lumicene® mPE M2711 PCE is a Metallocene based Linear Low Density Polyethylene with hexene as comonomer. This product contains slip and anti-block agents. Lumicene® mPE M2711 PCE can be processed at high output rates with low extrusion pressure, excellent…
About Product Description Supplier British Petroleum Generic PP not specified Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 0.9 g/cm³ ASTM D-1505 Melt flow rate 230℃,2.16kg 25 g/10min ASTM D-1238 MECHANICAL Nominal value Unit Test…
About Polypropylene Aceso® PPM R021 S01 is random copolymer polypropylene with a Melt Flow Index of 1.8 g/10 min specially developed for the extrusion blow-moulding of medical containers and medical devices, to the exclusion of implants. This grade can also…
About DOWLEX™ 2629UE Polyethylene Resin for rotational and injection moulding is specifically designed for applications requiring excellent environmental stress crack resistance and impact strength combined with low warpage and good processing. Processing and Stabilisation: DOWLEX™ 2629UE Polyethylene Resin is fully…
About BYNEL® Series 3000 resins are anhydride-modified ethylene vinyl acetate polymers. They are available in pellet form for use in conventional extrusion and coextrusion equipment designed to process polyethylene (PE) resins. BYNEL 3000 series resins adhere to a wide variety…
About Rilsamid® AZM 23 BLACK T6LD resin is a fiberglass reinforced polyamide. This black colored grade is designed for injection moulding.&& Product Description Supplier Arkema Generic PA12 Material Status Commercial: Active Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe…
About BJ100HP is a special low viscosity polypropylene compound developed to fit the production of PP-GF composites in the direct LFT compression and injection moulding process as well as in combination with LGF concentrates on the injection moulding process. The…
About EPITEC® PC-912F is a Polycarbonate (PC) material. It is available in North America. Primary attribute of EPITEC® PC-912F: Flame Rated.&& Product Description Generic Polycarbonate Material Status Commercial: Active Features V-0,5VA Availabilitys North America Technical Data PHYSICAL Nominal value Unit…
About DAI-EL G-7210BP is a bisphenol curable, gum copolymer. It is designed especially for injection molding of seals. Properly compounded, DAI-EL G-7210BP produces vulcanizates with excellent heat and compression set resistance.&& Product Description Supplier Daikin Fluorochemicals Generic 氟橡胶 Material Status…
About SABIC® LDPE Powder 1922P5 is a pure, additive free standard CTR® tubular grade and a typically fine material for general purpose use. This grade is supplied in powder form. Application SABIC® LDPE Powder 1922P5 is a medium sized powder…