Enable™ 4002MC

About
Enable 4002MC is a medium density ethylene 1-hexene copolymer. Enable 4002MC pPE provides blown film with high stiffness and shrink along with good optical properties. Excellent bubble stability leads to high output capability in monolayer and coextruded films. Enable 4002MC is TNPP-free.&&

Product Description
Supplier	ExxonMobil
Generic	mPE
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.940	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	0.25	g/10min	ASTM D1238

film	Nominal value	Unit	Test method
Secant modulus
1% secant, MD	537	MPa
1% secant, TD	729	MPa
tensile strength
MD, yield	19.5	MPa
TD, yield	24.1	MPa
MD, fracture	66.7	MPa
TD, fracture	48.6	MPa
Tensile strain
MD, fracture	490	%
TD, fracture	810	%
Drop hammer impact	63	g	ASTM D1709
Elmandorf tear strength
MD	14	g
TD	600	g

optical performance	Nominal value	Unit	Test method
gloss
45°	26		ASTM D2457
Haze	21	%	ASTM D1003

Legal Statement	Nominal value	Unit	Test method

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.