| About |
|---|
| Enable 4009MC是一种中密度乙烯-己烯共聚物，可在挤出加工性能和薄膜性能（包括模量，拉伸，冲击和穿孔）之间实现出色的平衡。 TnPP是非必须添加剂。 |
| Product Description | |
|---|---|
| Supplier | ExxonMobil |
| Generic | mPE |
| Material Status | Commercial: Active |
| Availabilitys | Africa & Middle East ,North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.94 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.9 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Secant modulus (1% secant) | |||
| MD | 510.2 | MPa | ASTM D882 |
| TD | 527.9 | MPa | ASTM D882 |
| tensile strength | |||
| MD, yield | 17.9 | MPa | ASTM D882 |
| TD, yield | 20.7 | MPa | ASTM D882 |
| tensile strength | |||
| MD, fracture | 55.4 | MPa | ASTM D882 |
| TD, fracture | 43.4 | MPa | ASTM D882 |
| Tensile strain | |||
| MD, fracture | 600 | % | ASTM D882 |
| TD, fracture | 830 | % | ASTM D882 |
| Drop hammer impact | <60 | g | ASTM D1709 |
| Puncture force | 35.6 | N | |
| Puncture energy | 0.98 | m·N | |
| Elmandorf tear strength | |||
| MD | 20 | g | ASTM D1922 |
| TD | 550 | g | ASTM D1922 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |