EnCounter 1F030GF

About
Flame Retardant, 30% Glass Reinforced&&

Product Description
Supplier	EnCom
Generic	polybutylene terephthalate
Material Status	Commercial: Active
Features	Flame Characteristics
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.64	g/cm³	ASTM D792

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	120	MPa
fracture	120	MPa
Tensile strain
fracture	2.0	%	ASTM D638
Bending modulus	9310	MPa	ASTM D790
bending strength	179	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	80	J/m	ASTM D256

THERMAL	Nominal value	Unit
Hot deformation temperature
0.45 MPa, unannealed	222	℃
1.8 MPa, unannealed	202	℃

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level
1.60 mm	V-0
2.50 mm	5VA

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	121	°C
Drying time	3.0 to 4.0	hr
Recommended maximum moisture content	0.020	%
Barrel rear temperature	238 to 254	°C
Barrel middle temperature	243 to 260	°C
Barrel front temperature	249 to 266	°C
Nozzle temperature	243 to 260	°C
Processing (melt) temperature	249 to 266	°C
Mold temperature	66 to 88	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.