EnCounter 2512IM

About
Impact Modified PC Polyester&&

Product Description
Supplier	EnCom
Generic	PC+PET
Material Status	Commercial: Active
Features	High impact resistance
Availabilitys	North America
Process Methods	Profile extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.24	g/cm³	ASTM D792
Melt Flow Rate
260℃，5.0kg	25	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	55.2	MPa	ASTM D638
Tensile strain
fracture	95	%	ASTM D638
Bending modulus	2210	MPa	ASTM D790
bending strength	84.8	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	640	J/m	ASTM D256

THERMAL	Nominal value	Unit
Hot deformation temperature
0.45 MPa, unannealed	122	℃
1.8 MPa, unannealed	111	℃

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	93 to 107	°C
Drying time	2.0 to 4.0	hr
Recommended maximum moisture content	0.020	%
Barrel rear temperature	243 to 271	°C
Barrel middle temperature	249 to 277	°C
Barrel front temperature	257 to 282	°C
Nozzle temperature	254 to 274	°C
Processing (melt) temperature	260 to 279	°C
Mold temperature	66 to 93	°C
Back pressure	0.345 to 0.689	MPa
Screw speed	40 to 75	rpm

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.