| About |
|---|
| ENGAGE™ 7367 Polyolefin Elastomer is an ethylene-butene copolymer that has excellent flow characteristics and performs well in a wide range of general purpose thermoplastic elastomer applications This product is delivered with a nominal talc partitioning agent to assist in material handling. Main Characteristics Pellet form Excellent flow characteristics Peroxide, silane, and radiation curable Improved impact in polypropylene and polyethylene High filler loading Applications General purpose thermoplastic elastomers Impact modification Wire and cable&& |
| Product Description | |
|---|---|
| Supplier | DOW |
| Generic | Polyolefin Elastomer |
| Material Status | Commercial: Active |
| Features | High impact resistance,Heat Stabilized |
| Availabilitys | Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.874 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.80 | g/10min | ASTM D1238 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tear strength | 44.0 | kN/m | ASTM D624 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass transition temperature | > 51.0 | ℃ | Internal Method |
| Vicat Softening Temp | 42.0 | ℃ | ASTM D1525 |
| Melting temperature | |||
| DSC | 51.0 | ℃ | Internal Method |
| Crystallization peak temperature | |||
| DSC | 13.0 | ℃ | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | ASTM D2240 | ||
| Shaw’s A | 65 | ASTM D2240 | |
| Shaw’s D | 23 | ASTM D2240 | |
| Tensile modulus | |||
| 100% secant | 2.60 | MPa | ASTM D638 |
| tensile strength | |||
| Fracture, molded | 5.20 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, molded | > 600 | % | ASTM D638 |
| Bending modulus | ASTM D790 | ||
| 1% secant | 14.1 | MPa | ASTM D790 |
| 2% secant | 14.2 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 20 in/min |
| 3. Die C |
| 4. 10°C/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |