ENGAGE™ 8003

About
ENGAGE™ 8003 Polyolefin Elastomer is an ethylene-octene copolymer that has excellent flow characteristics and performs well in a wide variety of general purpose thermoplastic elastomer applications. ENGAGE 8003 provides superb impact properties in blends with polypropylene (PP) and polyethylene (PE). It also provides high filler loading capability and outstanding peroxide cure capability. When cross-linked by peroxide, silane, or irradiation, it gives exceptional heat aging, compression set, and weather resistance properties, and may be used to produce high performance electrical insulation and jacketing. Main Characteristics: Pellet form Excellent flow characteristics Improved impact in polypropylene and polyethylene High filler loading Peroxide, silane, and radiation curable Exceptional heat aging, compression set, and weather resistance Complies with: U.S. FDA 21 CFR 177.1520(c)3.2c EU, No 10/2011 Japan Hygienic Olefin and Styrene Plastics Association U.S. FDA DMF Consult the regulations for complete details. Applications: General purpose thermoplastic elastomers Wire and cable Impact modification&&

About

ENGAGE™ 8003 Polyolefin Elastomer is an ethylene-octene copolymer that has excellent flow characteristics and performs well in a wide variety of general purpose thermoplastic elastomer applications. ENGAGE 8003 provides superb impact properties in blends with polypropylene (PP) and polyethylene (PE). It also provides high filler loading capability and outstanding peroxide cure capability. When cross-linked by peroxide, silane, or irradiation, it gives exceptional heat aging, compression set, and weather resistance properties, and may be used to produce high performance electrical insulation and jacketing. Main Characteristics: Pellet form Excellent flow characteristics Improved impact in polypropylene and polyethylene High filler loading Peroxide, silane, and radiation curable Exceptional heat aging, compression set, and weather resistance Complies with: U.S. FDA 21 CFR 177.1520(c)3.2c EU, No 10/2011 Japan Hygienic Olefin and Styrene Plastics Association U.S. FDA DMF Consult the regulations for complete details. Applications: General purpose thermoplastic elastomers Wire and cable Impact modification&&

Product Description
Supplier	DOW
Generic	Polyolefin Elastomer
Material Status	Commercial: Active
Availabilitys	North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.885	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	1.0	g/10min	ASTM D1238
Mooney viscosity
ML 1+4，121℃	22	MU	ASTM D1646

elastic body	Nominal value	Unit	Test method
tear strength	61.0	kN/m	ASTM D624

THERMAL	Nominal value	Unit	Test method
Glass transition temperature	-46.0	℃	Internal Method
Vicat Softening Temp	63.0	℃	ASTM D1525
Melting temperature
DSC	77.0	℃	Internal Method
Crystallization peak temperature
DSC	60.0	℃	Internal Method

MECHANICAL	Nominal value	Unit	Test method
Shore hardness			ASTM D2240
Shaw A, molded	84		ASTM D2240
Shaw’s D, molded	31		ASTM D2240
Tensile modulus
100% cut, molded	4.80	MPa	ASTM D638
tensile strength
Fracture, molded	18.2	MPa	ASTM D638
Tensile strain
Fracture, molded	640	%	ASTM D638
Bending modulus			ASTM D790
1% cut, molded	33.7	MPa	ASTM D790
2% cut, molded	32.6	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
2. 20 in/min
3. Die C
4. 10°C/min
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.