ENGAGE™ 8180

About
ENGAGE™ 8180 Polyolefin Elastomer is a lower density, high performance ethylene-octene copolymer that has excellent flow characteristics and provides superb impact properties in blends with polypropylene (PP) and polyethylene (PE). It is widely used in TPO applications where excellent flow temperature impact properties are desired. ENGAGE 8180 also provides high filler loading capability and excellent electrical properties. When cross-linked by peroxide, silane, or irradiation, it gives exceptional heat aging, compression set, and weather resistance properties. Main Characteristics: Pellet form Excellent flow characteristics Improved impact in polypropylene and polyethylene High filler loading Peroxide, silane, and radiation curable Exceptional heat aging, compression set, and weather resistance when cured Applications: General purpose thermoplastic elastomers Impact modification Thermoplastic olefins (TPO) Wire and cable Complies with: EU, No 10/2011 U.S. FDA 177.1520(c)3.2c U.S. FDA DMF Consult the regulations for complete details.&&

About

ENGAGE™ 8180 Polyolefin Elastomer is a lower density, high performance ethylene-octene copolymer that has excellent flow characteristics and provides superb impact properties in blends with polypropylene (PP) and polyethylene (PE). It is widely used in TPO applications where excellent flow temperature impact properties are desired. ENGAGE 8180 also provides high filler loading capability and excellent electrical properties. When cross-linked by peroxide, silane, or irradiation, it gives exceptional heat aging, compression set, and weather resistance properties. Main Characteristics: Pellet form Excellent flow characteristics Improved impact in polypropylene and polyethylene High filler loading Peroxide, silane, and radiation curable Exceptional heat aging, compression set, and weather resistance when cured Applications: General purpose thermoplastic elastomers Impact modification Thermoplastic olefins (TPO) Wire and cable Complies with: EU, No 10/2011 U.S. FDA 177.1520(c)3.2c U.S. FDA DMF Consult the regulations for complete details.&&

Product Description
Supplier	DOW
Generic	Polyolefin Elastomer
Material Status	Commercial: Active
Availabilitys	North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.863	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	0.50	g/10min	ASTM D1238
Mooney viscosity
ML 1+4，121℃	37	MU	ASTM D1646

elastic body	Nominal value	Unit	Test method
tear strength	32.0	kN/m	ASTM D624

THERMAL	Nominal value	Unit	Test method
Glass transition temperature	-55.0	℃	Internal Method
Vicat Softening Temp	41.0	℃	ASTM D1525
Melting temperature
DSC	47.0	℃	Internal Method
Crystallization peak temperature
DSC	32.0	℃	Internal Method

MECHANICAL	Nominal value	Unit	Test method
Shore hardness			ASTM D2240
Shore A, 1 second, molded	63		ASTM D2240
Shore D, 1 second, molded	16		ASTM D2240
Tensile modulus
100% cut, molded	1.90	MPa	ASTM D638
tensile strength
Fracture, molded	6.30	MPa	ASTM D638
Tensile strain
Fracture, molded	910	%	ASTM D638
Bending modulus			ASTM D790
1% cut, molded	8.50	MPa	ASTM D790
2% cut, molded	7.70	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
2. 20 in/min
3. Die C
4. 10°C/min
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.