| About |
|---|
| ENGAGE™ 8407 Polyolefin Elastomer is an ethylene-octene copolymer that offers excellent performance in durable injection molded industrial and consumer goods and compression molded gaskets. ENGAGE 8407 provides high clarity in products requiring visual inspection and allows the use of hot runner molds to enhance production efficiency. In addition, the low density can help control resin and production costs, while reducing the weight of end products. ENGAGE 8407 also provides good impact properties in blends with polypropylene (PP) and polyethylene (PE), especially in applications requiring high melt flow modifiers. Main Characteristics: Pellet form Excellent flow characteristics Improved impact in polypropylene and polyethylene Talc dusted (untreated, 1 µm) Applications: Injection molded industrial and consumer durable goods Impact modification&& |
| Product Description | |
|---|---|
| Supplier | DOW |
| Generic | Polyolefin Elastomer |
| Material Status | Commercial: Active |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.870 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 30 | g/10min | ASTM D1238 |
| Mooney viscosity | |||
| ML 1+4，121℃ | 2 | MU | ASTM D1646 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass transition temperature | -54.0 | ℃ | Internal Method |
| Vicat Softening Temp | 41.0 | ℃ | ASTM D1525 |
| Melting temperature | |||
| DSC | 60.0 | ℃ | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | ASTM D2240 | ||
| Shore A, 1 second, molded | 72 | ASTM D2240 | |
| Shore D, 1 second, molded | 20 | ASTM D2240 | |
| tensile strength | |||
| Fracture, molded | 3.30 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, molded | 1000 | % | ASTM D638 |
| Bending modulus | |||
| 2% cut, molded | 12.1 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 20 in/min |
| 3. 10°C/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |