| About |
|---|
| ENPRENE 659 is a Styrene Butadiene Styrene Block Copolymer (SBS) product. It is available in Asia Pacific. Characteristics include: Clarity Linear Polymer Structure&& |
| Product Description | |
|---|---|
| Supplier | En Chuan |
| Generic | SBS |
| Material Status | Commercial: Active |
| Features | Good Clarity,Linear polymer structure |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.970 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，5.0kg | 1.0 | g/10min | ASTM D1238 |
| oils | |||
| Other oils | 0.0 | phr | |
| Styrene/Butadiene | Ratio: 50/50 | ASTM D1416 | |
| Ash Content | 0.2 | % | ASTM D1416 |
| Volatiles | 0.40 | wt% | ASTM D1416 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 94 | ASTM D2240 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 19.1 | MPa | ASTM D412 |
| 300% strain | 5.39 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 650 | % | ASTM D412 |
| tear strength | 86.3 | kN/m | ASTM D624 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |