| About |
|---|
| ENSOFT SM-141-45A is a Thermoplastic Elastomer (TPE) product filled with mineral. It can be processed by injection molding and is available in Europe or North America. Characteristics include: Eco-Friendly/Green Good Processability Heat Stabilizer UV Resistant UV Stabilized&& |
| Product Description | |
|---|---|
| Generic | SEBS |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Excellent Processability,High elastic,Renewable resources,Heat Stabilized,Good coloring |
| Availabilitys | North America,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.08 | g/cm³ | ISO 2781 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 5.0 | MPa | ISO 37 |
| 300% strain | 2.0 | MPa | ISO 37 |
| 100% strain | 1.2 | MPa | ISO 37 |
| Tensile strain | |||
| fracture | 700 | % | ISO 37 |
| tear strength | |||
| TD | 25 | kN/m | ISO 34-1 |
| Compression deformation | ASTM D395B | ||
| 23℃，72 hr | 15 | % | ASTM D395B |
| 70℃，22 hr | 31 | % | ASTM D395B |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 3 seconds | 45 | ISO 868 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | -19 | ℃ | |
| Operating temperature | |||
| Maximum Dynamic | 90 | ℃ | |
| Maximum Static | 110 | ℃ |
| Process Conditions | |||
|---|---|---|---|
| Injection | Nominal value | Unit | Test method |
| Hopper temperature | 150 to 160 | ℃ | |
| Barrel rear temperature | 160 to 170 | ℃ | |
| Barrel front temperature | 170 to 180 | ℃ | |
| Nozzle temperature | 185 to 190 | ℃ | |
| Processing (melt) temperature | 190 to 200 | ℃ | |
| Mold temperature | 10 to 90 | ℃ | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |