ENSOFT SO-161-55A

About
This polyolefin based thermoplastic elastomer (SEBS) compound is high mineral filled, completely recyclable and suitable for general purpose applications. ENSOFT® series can be processed with conventional thermoplastics machinery Additive Packages : T / Heat and UV stabilizer Key Features : Excellent ozone, UV and weathering resistance Rubberlike elasticity in a wide temperature range Easy colorability with proper MB (PE, PP, etc. based) Process Method : Injection/multi injection molding Uses : Industrial applications, automotive, personal care, toys, consumer goods, home&kitchen appliances&&

About

This polyolefin based thermoplastic elastomer (SEBS) compound is high mineral filled, completely recyclable and suitable for general purpose applications. ENSOFT® series can be processed with conventional thermoplastics machinery Additive Packages : T / Heat and UV stabilizer Key Features : Excellent ozone, UV and weathering resistance Rubberlike elasticity in a wide temperature range Easy colorability with proper MB (PE, PP, etc. based) Process Method : Injection/multi injection molding Uses : Industrial applications, automotive, personal care, toys, consumer goods, home&kitchen appliances&&

Product Description
Generic	TPE
Material Status	Commercial: Active
Features	Weather resistance is good,High elastic,Renewable resources,Ozone resistance,Solvent resistance,Heat Stabilized,Good coloring
Availabilitys	North America,Europe
Process Methods	Multiple injection molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.18	g/cm³	ISO 1183/A

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shore A, 3 seconds	55		ISO 868

elastic body	Nominal value	Unit	Test method
tensile strength
fracture	5.30	MPa	ISO 37
100% strain	1.20	MPa
300% strain	1.70	MPa
Tensile strain
fracture	720	%	ISO 37
tear strength
TD	28	kN/m	ISO 34-1
Compression deformation
23℃，72 hr	24	%
70℃，22 hr	43	%

THERMAL	Nominal value	Unit
Embrittlement temperature	-55.0	℃
Operating temperature
Dynamic	90	℃
Static	110	℃

Process Conditions
injection	Nominal value	Unit	Test method
Hopper temperature	150 to 160	°C
Barrel middle temperature	160 to 170	°C
Barrel front temperature	170 to 180	°C
Nozzle temperature	185 to 190	°C
Processing (melt) temperature	190 to 200	°C
Mold temperature	10 to 50	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.