| About |
|---|
| PS overmoulding SEBS grade Additive Packages : T / Heat and UV stabilizer Key Features : Rubberlike elasticity Ease of coloring by proper MB (PE, PP, etc. based) Ease of processing (no pre-drying requested) Recyclability&& |
| Product Description | |
|---|---|
| Generic | TPE |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Excellent Processability,High elastic,Renewable resources,Good bond,Solvent resistance,Heat Stabilized,Good coloring |
| Availabilitys | North America,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.10 | g/cm³ | ISO 1183/A |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 3 seconds | 60 | ISO 868 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 5.00 | MPa | ISO 37 |
| 100% strain | 1.40 | MPa | |
| 300% strain | 3.00 | MPa | |
| Tensile strain | |||
| fracture | 540 | % | ISO 37 |
| tear strength | |||
| TD | 28 | kN/m | ISO 34-1 |
| Compression deformation | |||
| 23℃，72 hr | 25 | % | |
| 70℃，22 hr | 60 | % |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | -55.0 | ℃ | |
| Operating temperature | |||
| Dynamic | 90 | ℃ | |
| Static | 135 | ℃ |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Hopper temperature | 185 to 205 | °C | |
| Barrel middle temperature | 190 to 210 | °C | |
| Barrel front temperature | 195 to 215 | °C | |
| Nozzle temperature | 200 to 220 | °C | |
| Processing (melt) temperature | 205 to 225 | °C | |
| Mold temperature | 60 to 80 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |