EnviroHDPE 8096

About
EnviroHDPE 8096 is a High Density Polyethylene product. It can be processed by injection molding and is available in North America.&&

Product Description
Generic	HDPE
Material Status	Commercial: Active
Features	High density
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.960	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	8.0	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength	31.0	MPa	ASTM D638
Tensile strain
fracture	700	%	ASTM D638
Bending modulus	1450	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.