EOS PA 2200 Performance 1.0

About
This whitish fine powder PA 2200 on the basis of polyamide 12 serves with its very well-balanced property profile a wide variety of applications. Laser-sintered parts made from PA 2200 possess excellent material properties: high strength and stiffness good chemical resistance excellent long-term constant behaviour high selectivity and detail resolution various finishing possibilities (e.g. metallisation, stove enamelling, vibratory grinding, tub colouring, bonding, powder coating, flocking) bio compatible according to EN ISO 10993-1 and USP/level VI/121 °C approved for food contact in compliance with the EU Plastics Directive 2002/72/EC (exception: high alcoholic foodstuff) Typical applications of the material are fully functional plastic parts of highest quality. Due to the excellent mechanical properties the material is often used to substitute typical injection moulding plastics. The biocompatibility allows its use e.g. for prostheses, the high abrasion resistance allows e.g. the realisation of movable part connections. 100 µm layer thickness: Performance is the parameter set of choice for parts with high demands on mechanical properties and fracture behaviour, especially when the part is going to be subjected to multiaxial loading in all three directions. Performance parts are characterized by the highest degree of isotropic strength and rigidity. The choice of 100 µm layer thickness results in fine resolution and also very high surface quality and detail resolution.&&

About

This whitish fine powder PA 2200 on the basis of polyamide 12 serves with its very well-balanced property profile a wide variety of applications. Laser-sintered parts made from PA 2200 possess excellent material properties: high strength and stiffness good chemical resistance excellent long-term constant behaviour high selectivity and detail resolution various finishing possibilities (e.g. metallisation, stove enamelling, vibratory grinding, tub colouring, bonding, powder coating, flocking) bio compatible according to EN ISO 10993-1 and USP/level VI/121 °C approved for food contact in compliance with the EU Plastics Directive 2002/72/EC (exception: high alcoholic foodstuff) Typical applications of the material are fully functional plastic parts of highest quality. Due to the excellent mechanical properties the material is often used to substitute typical injection moulding plastics. The biocompatibility allows its use e.g. for prostheses, the high abrasion resistance allows e.g. the realisation of movable part connections. 100 µm layer thickness: Performance is the parameter set of choice for parts with high demands on mechanical properties and fracture behaviour, especially when the part is going to be subjected to multiaxial loading in all three directions. Performance parts are characterized by the highest degree of isotropic strength and rigidity. The choice of 100 µm layer thickness results in fine resolution and also very high surface quality and detail resolution.&&

Product Description
Generic	PA12
Material Status	Commercial: Active
Features	Good Rigidity,Good surface appearance,Biocompatible,Food contact compliance,Good wear resistance,Solvent resistance
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	3D Printing, Laser Sintering/Melting

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.930	g/cm³	Internal Method
Thickness（Layer）	100.0	µm

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
23℃	4.8	kJ/m²	ISO 179/1eA
Charpy Unnotch Impact strength
23℃	53	kJ/m²	ISO 179/1eU
Impact strength of cantilever beam notch
23℃	4.4	kJ/m²	ISO 180-1A

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp
B50	163	℃	ISO 306
Melting temperature	176	℃	ISO 11357

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shore D, 15 seconds	75		ISO 868
Tensile modulus	1700	MPa	ISO 527-2
tensile strength	50.0	MPa	ISO 527-2
Tensile strain
fracture	10	%	ISO 527-2
fracture	20	%	ISO 527-2
Bending modulus
23℃	1500	MPa	ISO 178

Notes
1. Typical properties: these are not to be construed as specifications.
2. X Direction
3. Z Direction
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.