EPAMOULD 295A83W

About
EPAMOULD 295A83W is a Thermoplastic Polyurethane Elastomer (Polyester) (TPU-Polyester) product. It can be processed by extrusion or injection molding and is available in Europe. Characteristics include: Food Contact Acceptable High Flexibility High Strength&&

Product Description
Generic	TPU-酯
Material Status	Commercial: Active
Features	Good Rigidity,Hydrolysis stability,Food contact compliance,High Flexibility
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.19	g/cm³

MECHANICAL	Nominal value	Unit
Shore hardness
Shaw’s A	95
Wear amount	35.0	mm³

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.