EPDM 644 - SOLIAO

About
EPDM 644 is a semi-amorphous ethylene-propylene-diene terpolymer (EPDM) grade designed for molded and extruded applications. It is ideally suited for general-purpose gaskets and moldings, extruded profiles and hoses. The combination of medium viscosity and low crystallinity allows for good balance of processability, low temperature properties, and product performance. Main Characteristics: Medium diene Medium molecular weight Applications: General purpose gaskets and moldings Extruded profiles and hoses Notes: Can be used in contact with all foods except water in oil emulsions, high or low fat, and low moisture fats and oil. Adhesives only. Complies with U.S. FDA 21 CFR 177.2600 U.S. FDA 21 CFR 177.1520 U.S. FDA 21 CFR 175.105 U.S. FDA 21 CFR 177.1210 Consult the regulations for complete details.&&

About

EPDM 644 is a semi-amorphous ethylene-propylene-diene terpolymer (EPDM) grade designed for molded and extruded applications. It is ideally suited for general-purpose gaskets and moldings, extruded profiles and hoses. The combination of medium viscosity and low crystallinity allows for good balance of processability, low temperature properties, and product performance. Main Characteristics: Medium diene Medium molecular weight Applications: General purpose gaskets and moldings Extruded profiles and hoses Notes: Can be used in contact with all foods except water in oil emulsions, high or low fat, and low moisture fats and oil. Adhesives only. Complies with U.S. FDA 21 CFR 177.2600 U.S. FDA 21 CFR 177.1520 U.S. FDA 21 CFR 175.105 U.S. FDA 21 CFR 177.1210 Consult the regulations for complete details.&&

Product Description
Supplier	DOW
Generic	EPDM+SEBS
Material Status	Commercial: Active
Availabilitys	North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.860	g/cm³	ASTM D297
Mooney viscosity
ML 1+4，125℃	36 to 44	MU	ASTM D1646
Ethylene composition	54.0 to 56.0	wt%	ASTM D3900
Ethylidene norbornene content	4.5 to 5.3	wt%	ASTM D6047
Propylene content	40.0	wt%	ASTM D3900
Residual conversion metal	< 10	ppm	Internal Method
molecular weight distribution	Medium		Internal Method
Ash Content	< 0.1	%	ASTM D5667
Volatiles	< 0.40	wt%	Internal Method

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.