| About |
|---|
| A single component, silver-filled epoxy with a smooth, thixotropic consistency. It is a version of EPO-TEK® H20S designed primarily for enhanced dispensing. Formerly 97-81-1&& |
| Product Description | |
|---|---|
| Generic | 环氧树脂 |
| Material Status | Commercial: Active |
| Features | Thixotropic |
| Availabilitys | Africa & Middle East ,North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Particle size | < 20.0 | µm | |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Degradation Temperature | 404 | ℃ | |
| working temperature | |||
| Continuous | -55 to 200 | ℃ | |
| Intermittent | -55 to 300 | ℃ | |
| Storage Modulus | 6.91 | GPa | |
| Thixotropic index | 4.50 | ||
| Heating reduction | |||
| 200℃ | 0.050 | % | |
| 250℃ | 0.16 | % | |
| 300℃ | 0.82 | % |
| Uncured Properties | Nominal value | Unit | Test method |
|---|---|---|---|
| colour | Silver | ||
| Density | 2.93 | g/cm³ | |
| viscosity | |||
| 23℃ | 1.3 | Pa·s | |
| storage stability | 2900 to 4300 | min |
| Cured Properties | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 60 | ||
| Volume resistivity | |||
| 23℃ | 1.4E-4 | ohms·cm |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| — | 4.8E-5 | cm/cm/℃ | |
| — | 2.8E-4 | cm/cm/℃ | |
| Glass transition temperature | 70.0 | ℃ | |
| Linear coefficient of thermal expansion | |||
| MD | |||
| Thermal conductivity coefficient | 2.2 | W/m/K | |
| Storage period | |||
| -40℃ | 52 | wk |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Below Tg |
| 3. Above Tg |
| 4. 100 rpm |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |