Epocast 1633 A/B

About
DESCRIPTION: Epocast® 1633-A/B epoxy syntactic is a medium paste, halogen-free self-extinguishing compound designed for potting fasteners in honeycomb structures. The epoxy syntactic is easily extruded through 1/8 in. (3mm) nozzle orifice, but is non-flowing after application. It is easy to handle in isolated repair areas because the syntactic paste is available in dual-barrel cartridges. Epocast® 1633-A/B epoxy syntactic sets quickly at room temperature.&&

Product Description
SupplierHuntsman
Generic环氧树脂
Material StatusCommercial: Active
FeaturesHalogen free,Self-extinguishing
AvailabilitysNorth America

Technical Data
PHYSICALNominal valueUnitTest method
Density ASTM D792
0.660g/cm³ASTM D792
0.680g/cm³ASTM D792
0.730g/cm³ASTM D792
viscosity ASTM D2196
Soft-paste ASTM D2196
Paste ASTM D2196
Soft-paste ASTM D2196

MECHANICALNominal valueUnitTest method
Compression modulus1860MPaASTM D695
compressive strength
25℃44.8MPaASTM D695

THERMALNominal valueUnitTest method
Thermosetting components 
resin按重量计算的混合比: 100 
Hardening method按重量计算的混合比: 50 

Supplementary informationNominal valueUnitTest method
Curing time
120℃5.0hr
Tensile Lap Shear(chromic acid etched al/al,25℃)9.65MPaASTM D1002
Weight gain ASTM D570
Distilled water:25℃2.5%ASTM D570
Mil-M-5606,hydraulic fluid:25℃0.40%ASTM D570
Skydrol 500-A:25℃0.70%ASTM D570
TTS-735,Type III test fluid:25℃0.30%ASTM D570
Working period
10 grams,25℃2.0 to 5.0minASTM D1338

Notes
1. Typical properties: these are not to be construed as specifications.
2. Hardener
3. Resin
4. System
5. on immersion – 24 hrs
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.