Epoxies, Ect. 50-3152 FR

About
50-3152 FR Potting and Encapsulating Compound has been formulated to meet the stringent non-burning requirements of UL 94 V-0. 50-3152FR Epoxy is listed with Underwriter’s Laboratories for passing UL 94 V-0. It also has a Comparative Tracking Index (CTI) of >600 Volts (PLC 0). 50-3152 FR is a two component epoxy potting and encapsulating system. This semi-rigid epoxy has excellent shock and vibration resistance along with good thermal conductivity. 50-3152 FR is designed for ease of use. It has a convenient 1:1 mix ratio and is low in viscosity. Features: Thermally conductive Easy 1:1 ratio Shock and vibration resistant Benefits: Protects electronics by quickly transferring heat Simple to use in production Will not damage electronic components&&

About

50-3152 FR Potting and Encapsulating Compound has been formulated to meet the stringent non-burning requirements of UL 94 V-0. 50-3152FR Epoxy is listed with Underwriter’s Laboratories for passing UL 94 V-0. It also has a Comparative Tracking Index (CTI) of >600 Volts (PLC 0). 50-3152 FR is a two component epoxy potting and encapsulating system. This semi-rigid epoxy has excellent shock and vibration resistance along with good thermal conductivity. 50-3152 FR is designed for ease of use. It has a convenient 1:1 mix ratio and is low in viscosity. Features: Thermally conductive Easy 1:1 ratio Shock and vibration resistant Benefits: Protects electronics by quickly transferring heat Simple to use in production Will not damage electronic components&&

Product Description
Generic	环氧树脂
Material Status	Commercial: Active
Features	Low Viscosity,noise reduction,Flame Characteristics,Thermal conductivity,V-0
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
THERMAL	Nominal value	Unit	Test method
Thermal conductivity coefficient	1.0	W/m/K

Electrical performance	Nominal value	Unit	Test method
Compared to the leakage tracing index	600	V

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	V-0		UL 94

Thermosetting mixed viscosity	Nominal value	Unit	Test method
25℃	31000	cP

Supplementary information	Nominal value	Unit	Test method
working temperature	-40.0 to 135	℃

Uncured Properties	Nominal value	Unit
colour
—	Beige
—	Black
—	Black
Weight Mix Ratio (PBW)
Part A	1.0
Part B	1.0
Density
25℃	1.49	g/cm³
25℃	1.55	g/cm³
viscosity
25℃	20	Pa·s
25℃	64	Pa·s
Curing time
100℃	0.50	hr
65℃	2.0 to 3.0	hr
25℃	24 to 48	hr
storage stability
25 ℃	100	min

Cured Properties	Nominal value	Unit
Shore hardness
Shaw’s D, 65 ℃	50
Shaw’s D, 25 ℃	80
lap shear strength	17.2	MPa
compressive strength	51.7	MPa
Electrical strength	16	kV/mm
Relative permittivity
100 Hz	5.00
Volume resistivity
25 ℃	7.6E+13	ohms·cm

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.