EQUATE PE EGDA-6888

About
EGDA-6888 is a high molecular weight, high density polyethylene copolymer that has been designed specifically for tubular film extrusion. Its broad molecular weight distribution and density have been optimized to give excellent bubble stability at high extrusion rates with high film strength and rigidity. The combination of high strength and excellent drawdownability makes EGDA-6888 ideal for down gauging in many applications. Tubular films produced from EGDA-6888 are recommended for high strength grocery sacks, shopping bags, produce bags and high quality thin films for multiwall sack liners and replacements for thin paper products. Films are nearly gel-free and have excellent treatability. They are ideally suited for printing of high quality graphics.&&

About

EGDA-6888 is a high molecular weight, high density polyethylene copolymer that has been designed specifically for tubular film extrusion. Its broad molecular weight distribution and density have been optimized to give excellent bubble stability at high extrusion rates with high film strength and rigidity. The combination of high strength and excellent drawdownability makes EGDA-6888 ideal for down gauging in many applications. Tubular films produced from EGDA-6888 are recommended for high strength grocery sacks, shopping bags, produce bags and high quality thin films for multiwall sack liners and replacements for thin paper products. Films are nearly gel-free and have excellent treatability. They are ideally suited for printing of high quality graphics.&&

Product Description
Generic	HDPE copolymer
Material Status	Commercial: Active
Features	Good Rigidity,Good dissection,Wide molecular weight distribution,Good Printability,Food contact compliance,High molecular weight,Copolymer,Good stability,High density
Availabilitys	Africa & Middle East ,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.952	g/cm³	ASTM D792
bulk density	560	kg/m³	ASTM D1895
Melt Flow Rate
190℃，21.6kg	10	g/10min	ASTM D1238

film	Nominal value	Unit	Test method
film thickness
test	15	µm
Secant modulus			ASTM D882
1% secant, MD: 15 µ m, blow molded film	1220	MPa	ASTM D882
1% secant, TD: 15 µ m, blow molded film	1470	MPa	ASTM D882
tensile strength			ASTM D882
MD, fracture, 15 µ m, blow molded film	60.0	MPa	ASTM D882
TD, fracture, 15 µ m, blow molded film	57.0	MPa	ASTM D882
Tensile strain			ASTM D882
MD, fracture, 15 µ m, blow molded film	380	%	ASTM D882
TD, fracture, 15 µ m, blow molded film	550	%	ASTM D882
Drop hammer impact
15 µ m, blow molded film	170	g	ASTM D1709-A
tear strength			ASTM D1922
MD，15 µm	70.0	kN/m	ASTM D1922
TD，15 µm	150.0	kN/m	ASTM D1922

THERMAL	Nominal value	Unit	Test method
Melting temperature	131	℃	Internal Method

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	215	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.