| About |
|---|
| Escor 5050 is primarily intended for extrusion coating, coextrusion coating and extrusion lamination. Outstanding adhesion to polar substrates, aluminum foil, metallized films, papers, iron, steel and glass. Offers excellent adhesion onto the substrates and good interlayer adhesion with coextruded LDPE and EVA’s. Very good adhesive polymer in film.&& |
| Product Description | |
|---|---|
| Supplier | ExxonMobil |
| Generic | EAA |
| Material Status | Commercial: Active |
| Availabilitys | Africa & Middle East ,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 190℃，2.16kg | 8.4 | g/10min | ASTM D1238 |
| Acrylic acid content | 9.0 | wt% | ExxonMobil Method |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |