ESPRENE™ SPO V0111

About
ESPRENE™ SPO V0111 is an Ethylene Elastomer material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America.&&

Product Description
Supplier	Sumitomo
Generic	TPE
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.870	g/cm³	JIS K7112
Melt Flow Rate	0.90	g/10min	JIS K7210

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	< -75.0	℃	JIS K7216
Vicat Softening Temp	32.0	℃	JIS K7206

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	64		JIS K7215
tensile strength
fracture	3.00	MPa	JIS K7113
Tensile strain
fracture	740	%	JIS K7113

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.