| About |
|---|
| Type: Estaloc® 59600 RETPU is a Polyester-Type Reinforced Engineered Thermoplastic (RETP). Features: Fast Cycling, Dimensional Stability, Durability, Aesthetics, Low Temperature Impact Uses: Injection Molding&& |
| Product Description | |
|---|---|
| Supplier | Lubrizol Advanced Materials |
| Generic | TPU-酯 |
| Material Status | Commercial: Active |
| Features | Good surface appearance,Good Dimensional Stability,Quick molding cycle,Durability,low-temperature impact resistance |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.66 | g/cm³ | ASTM D792 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | ASTM D256 | ||
| -40℃，0.762mm | 180 | J/m | ASTM D256 |
| 23℃，0.762mm | 430 | J/m | ASTM D256 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D, 5 seconds | 77 to 83 | ASTM D2240 | |
| Tensile modulus | |||
| 0.76 mm | 5490 | MPa | ASTM D638 |
| tensile strength | |||
| 0.762 mm | 96.0 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, 0.762 mm | 13 | % | ASTM D638 |
| Bending modulus | |||
| 0.76 mm | 4490 | MPa | ASTM D790 |
| bending strength | |||
| 0.76 mm | 126 | MPa | ASTM D790 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 104 | °C | |
| Drying time | 2.0 to 4.0 | hr | |
| Dew Point | -40 | °C | |
| Recommended maximum moisture content | 0.020 | % | |
| Barrel rear temperature | 216 | °C | |
| Barrel middle temperature | 227 | °C | |
| Barrel front temperature | 238 | °C | |
| Nozzle temperature | 243 | °C | |
| Processing (melt) temperature | 243 | °C | |
| Injection pressure | 69.0 to 103 | MPa | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |