| About |
|---|
| 2103-80AEN is a thermoplastic polyurethane elastomer. Feature: NSF Standard 61 certified, FDA compliance&& |
| Product Description | |
|---|---|
| Supplier | Lubrizol Advanced Materials |
| Material Status | Commercial: Active |
| Features | Flame Characteristics,Weather resistance is good |
| Availabilitys | North America |
| Process Methods | casting |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| proportion | 1.13 | ASTM D792 | |
| Forming shrinkage rate | |||
| transverse | 0-0.6 | % | ASTM D955 |
| flow | 0.5-0.7 | % | ASTM D955 |
| Melt Flow Rate | |||
| 224℃，1200g | 20 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | 83 | Shore A | ASTM D2240 |
| Taber abraser | 20 | mg | ASTM D1044 |
| Tensile modulus | |||
| 50% | 3.8 | MPa | ASTM D412 |
| 100% | 6.0 | MPa | ASTM D412 |
| 300% | 11.0 | MPa | ASTM D412 |
| elongation | 650 | % | ASTM D412 |
| tensile strength | 28.9 | MPa | ASTM D412 |
| elongation at break | 40 | % | ASTM D412 |
| tear strength | 87.6 | kN/m | ASTM D624 |
| Compression permanent deformation | |||
| 25℃ | 30 | % | ASTM D395 |
| 70℃ | 75 | % | ASTM D395 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| vicat softening point | |||
| 120℃/hr，9.8N | 72.2 | ℃ | ASTM D1525 |
| Glass transition temperature | -45 | ℃ | DSC |
| Linear coefficient of thermal expansion | 171 | mm/mm/℃ | ASTM D696 |
| Process Conditions | |||
|---|---|---|---|
| treatment conditions | Nominal value | Unit | Test method |
| drying temperature | 82-93 | ℃ | |
| Melt Temperature – Forming | 188-204 | ℃ | |
| Melt temperature – extrusion | 182-199 | ℃ | |
| Mold temperature | 16-60 | ℃ | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Die C |
| 3. Rate B (120°C/h), Loading 1 (10 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |