| About |
|---|
| Product Description | |
|---|---|
| Supplier | Lubrizol Advanced Materials |
| Material Status | Commercial: Negative |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Specific Gravity | 1.11 | ASTM D792 | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | 93 | Shore A | ASTM D2240 |
| Tensile Strength | 37 | MPa | ASTM D412 |
| Tensile Elongation | 660 | % | ASTM D412 |
| Tensile Stress | |||
| 100% | 10 | MPa | ASTM D412 |
| 300% | 17 | MPa | ASTM D412 |
| Tear strength | |||
| Graves | 110 | kgf/cm | ASTM D624 |
| Process Conditions | |||
|---|---|---|---|
| Processing conditions | Nominal value | Unit | Test method |
| Drying Temperature | 70-80 | ℃ | |
| Drying Time | 2-4 | hr | |
| Dew point | -40 | ℃ | |
| Maximum Moisture Content | 0.05 | % | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |