| About |
|---|
| Product Description | |
|---|---|
| Supplier | Lubrizol Advanced Materials |
| Material Status | Commercial: Active |
| Features | Hydrolysis stability,Transparency,Good transparency |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Specific Gravity | 1.23 | ASTM D792 | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | 61-67 | Shore D | ASTM D2240 |
| Tensile Strength | 44 | MPa | ASTM D-412 |
| Tensile Elongation | 380 | % | ASTM D-412 |
| Tensile Stress | |||
| 100% | 22 | MPa | ASTM D-412 |
| 100% | 30 | MPa | ASTM D-412 |
| Tear strength | 210 | kgf/cm | ASTM D624 |
| Abrasion Loss | 40 | mg loss | ISO 4649 |
| Process Conditions | |||
|---|---|---|---|
| Injection Molding | Nominal value | Unit | Test method |
| Rear Temperature Zone 1 | 195 | ℃ | |
| Middle Temperature Zone 2 | 205 | ℃ | |
| Front Temperature Zone 3 | 205 | ℃ | |
| Nozzle temperature | 210 | ℃ | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |