| About |
|---|
| Product Description | |
|---|---|
| Supplier | Lubrizol Advanced Materials |
| Material Status | Commercial: Active |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| hardness | 78 | Shore D | ASTM D2240 |
| proportion | 1.28 | g/cm³ | ASTM D792 |
| Mold shrinkage rate | 0.003 | m/m | ASTM D955 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile stress | |||
| 100% elongation | 330 | MPa | ASTM D412 |
| 300% elongation | 430 | MPa | ASTM D412 |
| tensile strength | 450 | MPa | ASTM D412 |
| elongation at break | 330 | % | ASTM D412 |
| tear strength | |||
| Die C | 260 | kgf/cm | ASTM D624 |
| Wear loss | 25 | mm³ | ISO 4649 |
| Compression deformation | |||
| 23℃，22hr | 35 | % | ASTM D395 |
| 70℃，22hr | 40 | % |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 130 | ℃ | ASTM D1525 |
| Process Conditions | |||
|---|---|---|---|
| Dry conditions | Nominal value | Unit | Test method |
| 70-80 ℃, dry with a dehumidification dryer | 4-5 | h | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |