| About |
|---|
| Type: Estane® UB410B is a Shore 70A, polyester based, hot melt adhesive with excellent low temperature flexibility thermoplastic polyurethane (TPU). Uses: Extrusion, Powder Coating&& |
| Product Description | |
|---|---|
| Supplier | Lubrizol Advanced Materials |
| Generic | TPU-酯 |
| Material Status | Commercial: Active |
| Features | Low temperature toughness,Soft |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.18 | g/cm³ | ASTM D792 |
| Melt Flow Rate | ASTM D1238 | ||
| 140℃，2.16kg | 8.0 | g/10min | ASTM D1238 |
| 160℃，2.16kg | 15 | g/10min | ASTM D1238 |
| 180℃，2.16kg | 35 | g/10min | ASTM D1238 |
| 200℃，2.16kg | 80 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 70 | ASTM D2240 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass transition temperature | -30.0 | ℃ | ASTM D3418 |
| Kofler Melting Temperature | 86 | ℃ | SRTM 3022-9 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Screw length to diameter ratio | 17.0:1.0 | ||
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |