| About |
|---|
| Fabrics woven or knit from acetate filament yarns have the look and feel of luxury. Consisting of pure cellulose acetate, Eastman Estron™ acetate yarn is available in bright and dull lusters. Because of its inherent whiteness, Eastman Estron™ acetate yarn can be dyed to render apparel fabrics that are especially bright and true in color.&& |
| Product Description | |
|---|---|
| Supplier | Eastman |
| Generic | CA |
| Material Status | Commercial: Active |
| Features | Good Dimensional Stability,Renewable resources,Mildew,Soft,Good coloring,Amorphous |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.32 | g/cm³ | ASTM D792 |
| Water absorption rate | 6.5 | % | ASTM D1909 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile strain | 22 to 25 | % | ASTM D2256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 260 | ℃ |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Burning rate | Burns relatively slow |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Breaking Tenacity | ASTM D2256 | ||
| Standard | 1.20 to 1.50 | g/denier | ASTM D2256 |
| Wet | 0.800 to 1.20 | g/denier | ASTM D2256 |
| Softening range | 204 to 229 | ℃ | |
| Sticking Point | 177 to 191 | ℃ |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |
