EUROPLEX® Film HC 0F028

About
EUROPLEX® Film HC 0F028 is a weather resistant and transparent co-extruded PMMA and PVDF film. It is designed to bring a state of the art UV protection and surface finish for thermoset materials such as High Pressure Laminates. This film shows excellent performance in long term outdoor weathering without the risk of color change or yellowing. The PMMA layer is based on a tailor made PMMA resin that provides excellent chemical adhesion to melamine resin while the PVDF top layer brings a high level of weatherability as well as a very good chemical resistance, anti-soiling, anti-fouling and easy to clean properties including graffiti. Application Due to its very good chemical adhesion to melamine resin combined with its excellent UV and weather resistance, EUROPLEX® Film HC 0F028 is suitable to be used as top layer on panels of exterior grade compact laminates.&&

About

EUROPLEX® Film HC 0F028 is a weather resistant and transparent co-extruded PMMA and PVDF film. It is designed to bring a state of the art UV protection and surface finish for thermoset materials such as High Pressure Laminates. This film shows excellent performance in long term outdoor weathering without the risk of color change or yellowing. The PMMA layer is based on a tailor made PMMA resin that provides excellent chemical adhesion to melamine resin while the PVDF top layer brings a high level of weatherability as well as a very good chemical resistance, anti-soiling, anti-fouling and easy to clean properties including graffiti. Application Due to its very good chemical adhesion to melamine resin combined with its excellent UV and weather resistance, EUROPLEX® Film HC 0F028 is suitable to be used as top layer on panels of exterior grade compact laminates.&&

Product Description
Supplier	Evonik
Generic	PVDF+PMMA
Material Status	Commercial: Active
Features	Weather resistance is good,Good surface appearance,Clean,Good bond,Solvent resistance
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.20	g/cm³	DIN 53479
surface tension
PVDF side	23	mN/m

film	Nominal value	Unit	Test method
tensile strength
yield	44.0	MPa	ISO 527-3
Tensile strain			ISO 527-3
yield	7.0	%	ISO 527-3
fracture	> 50	%	ISO 527-3

optical performance	Nominal value	Unit	Test method
Transmittance	92.0	%	ISO 13468-2
Haze	7.0	%	ASTM D1003
UV Transmittance – 280 – 380 nm	< 2.0	%	DIN EN 410

Supplementary information	Nominal value	Unit	Test method
Accelerated weathering resistance
method A，cycle 1，65% RH	No Visible Change		ISO 4892-2

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.