EUROPLEX® Sheet O

About
EUROPLEX® O is a novel material for the manufacturing of orthopedic devices. The advantages can be summed up as follows: EUROPLEX® O is characterized by its excellent impact and notched impact strength as well as its rigidity. Insoles and other orthopaedic devices made from EUROPLEX® O are virtually unbreakable. EUROPLEX® O can be thermoformed from temperatures as low as 90°C without pre-drying. It is easy to machine and its shape can also be subsequently corrected by simple means. EUROPLEX® O is not attacked by perspiration and is generally highly resistant to chemicals. The relatively light inherent color of EUROPLEX® O makes orthopedic aids very unobtrusive to wear and enables pressure points to be easily identified during fitting. EUROPLEX® O shows very good X-ray transmission. That means there is no need to remove orthopaedic devices for this examination method. EUROPLEX® O is physiologically unobjectionable and has a perfectly smooth surface. It is therefore easy-care and hygienic.&&

About

EUROPLEX® O is a novel material for the manufacturing of orthopedic devices. The advantages can be summed up as follows: EUROPLEX® O is characterized by its excellent impact and notched impact strength as well as its rigidity. Insoles and other orthopaedic devices made from EUROPLEX® O are virtually unbreakable. EUROPLEX® O can be thermoformed from temperatures as low as 90°C without pre-drying. It is easy to machine and its shape can also be subsequently corrected by simple means. EUROPLEX® O is not attacked by perspiration and is generally highly resistant to chemicals. The relatively light inherent color of EUROPLEX® O makes orthopedic aids very unobtrusive to wear and enables pressure points to be easily identified during fitting. EUROPLEX® O shows very good X-ray transmission. That means there is no need to remove orthopaedic devices for this examination method. EUROPLEX® O is physiologically unobjectionable and has a perfectly smooth surface. It is therefore easy-care and hygienic.&&

Product Description
Supplier	Evonik
Generic	PA Not specified
Material Status	Commercial: Active
Features	Good Rigidity,X-Ray Transparent,High impact resistance,Machinable,Solvent resistance
Availabilitys	Europe
Process Methods	Thermo forming

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.08	g/cm³	ISO 1183

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	2700	MPa	ISO 527-2
tensile strength	85.0	MPa	ISO 527-2

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	7.0	kJ/m²	ISO 180-1A

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp
B50	99.0	℃	ISO 306
Maximum operating temperature	70	℃

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.