EVALENE® PP PRB0201

About
PP is used in making films, adhesive tapes, cigarette and candy wrappers, cosmetics, pharmaceutical and food packaging materials. High Clarity. Hot-Fill Applications. Living Hinge. Evalene® Random Copolymer PP is widely used in the following applications: Injection Molding: Houseware, lunch boxes and pencil cases with “living hinges” Blow Molding: Baby bottles, bottles for juice, tea, water, medicine, and cosmetics Good Economics. Hot-Fill Applications. Excellent Film Clarity. Good Tenacities. Evalene® Homopolymer PP is the material of choice for a host of applications: Tape Extrusion: Woven bags for rice, cement and industrial chemicals Films: Bi-axially oriented, cast and inflation films for tapes, packaging, and labels Injection Molding: Monobloc furnitures, pails, houseware, containers, toys, caps Thermoforming: Fastfood containers, mineral water cups&&

About

PP is used in making films, adhesive tapes, cigarette and candy wrappers, cosmetics, pharmaceutical and food packaging materials. High Clarity. Hot-Fill Applications. Living Hinge. Evalene® Random Copolymer PP is widely used in the following applications: Injection Molding: Houseware, lunch boxes and pencil cases with “living hinges” Blow Molding: Baby bottles, bottles for juice, tea, water, medicine, and cosmetics Good Economics. Hot-Fill Applications. Excellent Film Clarity. Good Tenacities. Evalene® Homopolymer PP is the material of choice for a host of applications: Tape Extrusion: Woven bags for rice, cement and industrial chemicals Films: Bi-axially oriented, cast and inflation films for tapes, packaging, and labels Injection Molding: Monobloc furnitures, pails, houseware, containers, toys, caps Thermoforming: Fastfood containers, mineral water cups&&

Product Description
Generic	PP copolymer
Material Status	Commercial: Active
Features	Good Clarity,Random copolymer
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Melt Flow Rate
230℃，2.16kg	2.0	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23 ℃, injection molding	75	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed, injection molded	80.0	℃	ASTM D648
Melting peak temperature	145	℃	ASTM D3418

Supplementary information	Nominal value	Unit	Test method
Blow Molding Mold Temperature	20 to 40	℃
Blowing molding temperature	230 to 250	℃

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	76		ASTM D785
Tensile modulus
1% cut, injection molding	1100	MPa	ASTM D638
tensile strength
Yield, injection molding	30.0	MPa	ASTM D638
Tensile strain
Yield, injection molding	26	%	ASTM D638
Bending modulus
1% cut, injection molding	1000	MPa	ASTM D790

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.