| About |
|---|
| EVALENE® PRB0202 is perfect for applications where high clarity is required. This random PP grade also delivers good stiffness and impact strength, as well as excellent temperature resistance, making it ideal for hot-fill applications. EVALENE® PRB0202 can be used in a variety of blow molding applications including extrusion blow molding (EBM) and injection blow molding (IBM). FEATURES Excellent clarity and aesthetic advantages Ease of processing Fast cycles High gloss Good mechanical properties Meets Philippine FDA food contact requirements Halal-certified TYPICAL APPLICATIONS Hot-fill packaging Bottles for personal care products Bottles for cosmetics packaging Rigid packaging for consumer markets requiring high clarity&& |
| Product Description | |
|---|---|
| Generic | PP copolymer |
| Material Status | Commercial: Negative |
| Features | Good Rigidity,Excellent Processability,Good Clarity,Good surface appearance,High impact resistance,Quick molding cycle,Food contact compliance,Random copolymer,Antistatic property |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 230℃，2.16kg | 2.0 | g/10min | ASTM D1238 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 82.0 | ℃ | ASTM D648 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Blow Molding Mold Temperature | 20 to 40 | ℃ | |
| Blowing molding temperature | 200 | ℃ |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 90 | ASTM D785 | |
| Tensile modulus | |||
| 1% secant | 1440 | MPa | ASTM D638 |
| tensile strength | |||
| yield | 27.0 | MPa | ASTM D638 |
| Tensile strain | |||
| yield | 24 | % | ASTM D638 |
| Bending modulus | |||
| 1% secant | 933 | MPa | ASTM D790-A |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Melt temperature | 200 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 0.20 in/min |
| 3. 2.0 in/min |
| 4. 0.051 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |