| About |
|---|
| EVALENE® PRJ1102 is formulated with a high performance clarifier and anti-static additive, and is specifically intended for a broad range of injection molding applications requiring excellent product aesthetics including high transparency. This resin is designed to deliver improved cycle times and lower processing temperatures compared to other PP random copolymer injection molding grades. FEATURES Medium Flow High transparency High impact strength Low warpage High surface gloss Meets Philippine FDA food contact requirements Halal-certified TYPICAL APPLICATIONS Transparent Containers and Housewares Bottles Small Container Rigid Packaging&& |
| Product Description | |
|---|---|
| Generic | PP copolymer |
| Material Status | Commercial: Negative |
| Features | Low warping,Good Clarity,Good surface appearance,High impact resistance,Food contact compliance,Random copolymer,Moderate liquidity,Antistatic property |
| Availabilitys | Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 230℃，2.16kg | 11 | g/10min | ASTM D1238 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 24 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 83.0 | ℃ | ASTM D648 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 88 | ASTM D785 | |
| Tensile modulus | |||
| 1% secant | 1450 | MPa | ASTM D638 |
| tensile strength | ASTM D638 | ||
| yield | 29.0 | MPa | ASTM D638 |
| fracture | 24.0 | MPa | ASTM D638 |
| Tensile strain | ASTM D638 | ||
| yield | 24 | % | ASTM D638 |
| fracture | 1200 | % | ASTM D638 |
| Bending modulus | |||
| 1% secant | 935 | MPa | ASTM D790-A |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Processing (melt) temperature | 200 | °C | |
| Mold temperature | 20 to 40 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 0.20 in/min |
| 3. 2.0 in/min |
| 4. 0.051 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |